The Easiest Way to Patch Small Drywall Holes Without a Kit

I ripped a towel rack off the bathroom wall and left behind a hole the size of a quarter, plus a second, uglier hole where the other screw pulled out. My first thought was that I needed a contractor.

It cost about eight dollars at the hardware store and took me twenty minutes, and now I can barely find the spot even though I know where to look.

drywall hole patch, toothpaste temporary fix, spackle, sanding, paint match
drywall hole patch, toothpaste temporary fix, spackle, sanding, paint match

Small holes just need spackle

For anything smaller than a coin, you do not need a patch kit, mesh, or any special tools. You need a small tub of spackle and something flat to spread it.

  • Wipe the hole clean and knock out any loose bits
  • Press spackle into the hole with a putty knife or an old credit card
  • Overfill it slightly so it leaves a small bump
  • Let it dry, then sand it flat with fine sandpaper

The overfill-and-sand step is the whole trick. If you fill it flush, it shrinks as it dries and leaves a dimple you will see forever.

The toothpaste myth

You have probably heard you can patch a hole with white toothpaste. It works as a temporary fix in a rental if you are in a bind, but it shrinks, cracks, and yellows. It is a stopgap, not a repair. Use real spackle if you want it to last.

For paint matching, chip off a small piece of the wall and take it to the paint store. They can match it in minutes, and you can often buy a tiny sample jar instead of a full gallon.

📋 Quick Summary: Overfill a small hole with spackle, sand it flat, and touch up the paint. Skip the toothpaste except as a last-second rental fix.